Order Policy

An order, once placed and entered into production can only be cancelled with the consent of Anker-Holth under terms which indemnify the seller against loss. Due to the variety of variable construction options subject to buyer selection, many components of "Standard" models are in fact "Custom Made" to suit specific order requirements.
The probability of future use of any completed part is a factor in determining applicable cancellation charges.
Customer acceptance of those charges is required before order cancellation becomes final.
Shipping dates assigned at time of order entry are approximate and based upon production schedules and availability of material. The seller shall not be liable for failure to meet estimated delivery date or for unforeseen delays caused by circumstances beyond our control.
No penalty clause of any description, in order specification or detail terms, will apply unless written acceptance is obtained from a principal official of Anker-Holth prior to formal order entry.
The seller assumes no responsibility, and is not liable for any cost arising from the installation, use, maintenance, or repair of any product of its manufacture beyond the conditions stated in the Limited Warranty.

Catalog Information
This material has been prepared to serve as an information source for use by skilled persons to assist them in making design decisions involving the use of our manufactured products for which they assume full responsibility.
The information provided is intended to serve as a guide in developing design parameters and does not obligate the seller to assure application suitability of any end product.
Ali data and recommendations are offered by the seller free of charge for discretionary use by the buyer.
While ample factors of safety are incorporated into product designs, unforeseen circumstances beyond our realm of control can compromise those values resulting in unsatisfactory performance or failure. Warranty protection is extended exclusively to the quality of workmanship and materials which comprise our manufactured products. It does not apply to construction specifications developed on the basis of design considerations explained within the contents of this catalog.
In order to continue our commitment to produce products of the highest quality, Anker-Holth reserves the right to make design improvements and modifications, exclusive of those which affect mounting dimensions, at our discretion without issuance of change notice.